- Australian Building Standards AS2023:1977 specifies any section of a Bath or shower tray installed abutting a wall shall be provided with a tiling flange or tiling bead –not less than 12mm in height to ensure adequate water proofing is provided to the wall sheeting.
Refer to Bette Baths Tiling Lip Installation Instructions. - All Bette baths supplied to market with a waste & overflow are provided with the required waste connection set.
- All Bette Baths supplied with-out overflows (nominal 40mm BSP waste hole) are not supplied with waste connection.
- Metal bath stabilising feet are recommended as part of the installation process by the manufacturer, but are not mandatory under Australian Building Standards, and as such are an optional extra purchase item with each bath model sold. When using optional Bath Feet the recommended under-bath height is 140mm. This height can be raised by 20mm or lowered by 30mm. Always ensure there is adequate clearance if lowering the height.
